Grade2 ASTM B348 Russia VT1-0 (BT 1-0) GOST 26492

Grade2 ASTM B348    Russia VT1-0 (BT 1-0) GOST 26492

 

USD $ 9,580 / Ton

Approximate Size & Weight

Φ310mm~~~~Φ410mm  1.6 Ton Per Ingot

Φ480mm~~~~Φ580mm  3 Ton Per Ingot

Φ680mm~~~~Φ720mm  6 Ton Per Ingot

      Grade :     VT1-0   ( ВТ1-0 )
      Classification :   Titanium Gr2 Gr3 Gr4



Chemical composition in % for grade   VT1-0   ( ВТ1-0 )
Fe C Si N Ti O H Impurity
max   0.25 max   0.07 max   0.1 max   0.04 99.24 - 99.7 max   0.2 max   0.01 other 0.3
Comment: Ti is a basis; the percentage of Ti is given approximately.


Mechanical properties under Т=20oС for grade   VT1-0   ( ВТ1-0 )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
Sheet, GOST 22178-76     375   20-30      
Pipe, GOST 24890-81     390-590   15      
Bar annealed , GOST 26492-85     345   15 36-40 500-700  
Bar, GOST 26492-85     355-540   19-20 38-50 500-1000 Annealing
Plate , GOST 23755-79 11 - 60   370-570   13 27    
Plate , GOST 23755-79 60 - 150   295-540   10 24    


    Brinell hardness for     VT1-0   ( ВТ1-0 )   ,       HB 10 -1 = 131 - 163   MPa


Technological properties for grade   VT1-0   ( ВТ1-0 )
  Weldability: without limitations.


Technological properties of the material   VT1-0   ( ВТ1-0 ) .
        Melting temperature : 1668   °C


Physical properties for grade   VT1-0   ( ВТ1-0 )
T E 10- 5 a 10 6 l r C R 10 9
Grade MPa 1/Grade Watt/(m·Grade) kg/m3 J/(kg·Grade) Ohm·m
20 1.12   18.85 4505 540  
100   8.2        


Equivalent steels for grade     VT1-0   ( ВТ1-0 )
Warning! Indicated both exact and nearest equivalents.
USA Germany Japan France England
- DIN,WNr JIS AFNOR BS
Grade2
3.7034
3.7035
Ti2
Cl2
T-40
Ti-P.02
IMI125
Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]
​


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


You may also like