Your Trust Titanium & Titanium Alloy Supplier
Contact Us
This specification covers four grades of premium-quality titanium alloy products based on the melting practice used inmaking the alloy, as follows:Grade 1 - Double Consumable Electrode Vacuum Arc MeltedGrade 2 - Triple Consumable Electrode Vacuum Arc MeltedGrade 3 - Electron Beam Cold Hearth Refined (EBCHR) Followed by a Single Consumable Electrode Vacuum Arc MeltGrade 4 - Plasma Arc Melted Cold Hearth Refined (PAMCHR) Followed by a Single Consumable Electrode Vacuum ArcMelt
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength (Composition similar to UNS R54520)
This specification covers a titanium alloy in the form of bars, wire, flash-welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 square inches (103 cm2) and under in cross-sectional area, and stock of any size for flash-welded rings
Titanium Alloy, Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn (Composition similar to UNS R58640)
This specification covers a titanium alloy in the form of round bar and wire, 0.625 inch (15.88 mm) and under in nominal diameter or thickness.
Titanium Alloy, Bars and Rods3Al - 8V - 6Cr - 4Mo - 4ZrConsumable Electrode MeltedSolution Heat Treated and Centerless Ground or Peeled and Polished(Composition similar to UNS R58640)
This specification covers a titanium alloy in the form of bars and rods 1.00 inch (25.4 mm) and under in nominal diameter.
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged(Composition similar to UNS R56400)
This specification covers a titanium alloy in the form of bars, wire, forgings, and flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides and of stock of any size for forging and flash welded rings.
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable(Composition similar to UNS R56400)
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings up through 4.000 inches (101.60 mm) in diameter or least distance between parallel sides and stock of any size for forging, heading, or flash welded rings
Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable (Composition similar to UNS R56620)
This specification covers a titanium alloy in the form of bars, wire, forgings, and flash welded rings 4.000 inches (101.60 mm) and under in diameter or least distance between parallel sides and stock for forging or flash welded rings of any size.
Titanium Alloy Bars, Wire, and Rings, 8Al - 1Mo - 1V, Solution Heat Treated and Stabilized(Composition similar to UNS R54810)
This specification covers a titanium alloy in the form of bars, wire, flash-welded rings up through 4.000 inches (101.60 mm), inclusive, in diameter or least distance between parallel sides, and stock for flash-welded rings or heading of any size.
Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated (Composition similar to UNS R56260)
This specification covers a titanium alloy in the form of bars, wire, and forgings up through 4.000 inches (101.60 mm), inclusive, in diameter or least distance between parallel sides and forging stock of any size.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged (Composition similar to UNS R56400)
This specification covers a titanium alloy in the form of round, hexagon and square bars and forgings up through 3.000 inches (76.20 mm), inclusive, rectangular bar and forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and forging stock of any size.
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed(Composition similar to UNS R56400)
This specification covers a titanium alloy in the form of bars and forgings up through 10.000 inches (254.00. mm), inclusive, in diameter or least distance between parallel sides with a maximum cross-sectional area of 79.0 in2 (506.45 cm2) and forging stock of any size.
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes6Al - 4VAnnealed(Composition similar to UNS R56400)
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes, and stockfor forging or flash welded rings.
Titanium Alloy, Sheet, Strip, and Plate6AI - 4VAnnealed(Composition similar to UNS R56400)
This specification covers a titanium alloy in the form of sheet, strip, and plate.
Standard Specification forUnalloyed Titanium, for Surgical Implant Applications (UNSR50250, UNS R50400, UNS R50550, UNS R50700)1,2
Standard Specification forWrought Titanium-6Aluminum-4Vanadium ELI (Extra LowInterstitial) Alloy for Surgical Implant Applications (UNSR56401)1
Implants for surgery - Metallic materials
Implants for surgery — Metallicmaterials
Standard Specification forWrought Titanium-6Aluminum-7Niobium Alloy for SurgicalImplant Applications
Standard Specification forTitanium and Titanium Alloy Bars and Billets1This standard is issued under the fixed designation B348; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (´) indicates an editorial change since the last revision or reapproval.
Standard Specification forTitanium and Titanium Alloy Strip, Sheet, and Plate1This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.
Standard Specification forTitanium and Titanium Alloy Forgings1This standard is issued under the fixed designation B381; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (´) indicates an editorial change since the last revision or reapproval.
Standard Specification forTitanium and Titanium Alloy Seamless PipeThis standard is issued under the fixed designation B861; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (´) indicates an editorial change since the last revision or reapproval.
Standard Specification forTitanium and Titanium Alloy Welded Pipe1This standard is issued under the fixed designation B 862; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.
Pipe Flanges andFlanged FittingsNPS 1⁄2 Through NPS 24Metric/Inch Standard
